GENERAL DEscriptION
The SGM61430 and SGM61431 are internally compensated, synchronous Buck converters with a wide 4.5V to 36V input voltage range and 3A output current capability. These devices can be easily used in various industrial applications powered from unregulated sources. Easy compensation and cycle-by-cycle current limit are obtained by peak current mode control. With 64μA (TYP, SGM61430) current and ultra-low 0.6μA (TYP) shutdown current, they are well suited for battery powered systems to prolong battery life. Internal compensationuick and low component count design.
Both SGM61430 and SGM61431 can operate at fixed frequency with moderate or heavy load condition. In light load condition, the SGM61430 enters in the pulse frequency modulation (PFM) mode to improve high efficiency, while the SGM61431 works in the forced pulse width modulation (FPWM) mode to achieve low output ripple and good regulation.
The EN/SYNC employs an enable divider to establish a precision threshold that simplifies UVLO adjustment, device on/off control and power se Thermal shutdown and output short-circuit protection (hiccup mode) are also provided.
The SGM61430 and SGM61431 are both available in a Green SOIC-8 (Exposed Pad) package and can operate over -40℃ to +125℃ ambient temperature range.
FEATURES
Wide 4.5V to 36V Input Voltage Range
Up to 3A Continuous Output Current
SGM61430:
0.8V to 24V Output Voltage Range
PFM at Light Load Condition
390kHz Switching Frequency (Normal Operation)
SYNC Input for External Switching Clock
Integrated RDSON Switches: 115mΩ/90mΩ (TYP)
High Efficiency at Light Load Condition
Ultra-Low Shutdown Current: 0.6μA (TYP)
Peak Current Mode Control
Precision Enable Threshold with UVLO Setting
Cycle-by-Cycle Current Limit
1.5ms (TYP) Internal Soft-Start Time
-40℃ to +125℃ Operating Temperature Range
Available in a Green SOIC-8 (Exposed Pad) Package
APPLICATIONS
Industrial Power Supplies
Telecom and Datacom Systems
General Purpose Wide VIN Regulation