GENERAL DEscriptION

The SGM61012 and SGM61022 are efficientuency synchronous Buck converters with an input voltage range of 2.3V to 5.5V and a wide output current range that is optimized for compact solutions. It operates in PWM mode at heavy loads and automatically enters the power-save mode (PSM) at light loads to maintain its high efficiency.

Setting the MODE pin can enable deep sleep mode (). This device operates with an ultra-low current, and it can maintain high efficiency at very low load. This function keeps the standby current at its lowest level, and can increase the standby time of battery-powered application. To meet the re of system power rails, the output capacitors with values above 100μF can be used by the internal loop compensation.

With its adaptive hysteresis and pseudo-constant on-time control (AHP-COT) architecture, the load transient performance is excellent and the output voltage regulation accuracy is achieved.

The SGM61012 and SGM61022 are available in a Green TDFN-2×2-8AL package.

FEATURES

• Input Voltage Range: 2.3V to 5.5V

• Output Current: 2A

• 8.5μA (TYP) Ultra-Low Current in

• AHP-COT Architecture

• Fast Transient Regulation

• Duty Cycle Capability

• High-Efficiency under Light Load

• Output Discharge

• Short-Circuit Protection

• Power Good Output

• Thermal Shutdown
  

• Available in a Green TDFN-2×2-8AL Package

APPLICATIONS

General Purpose Point-of-Load Power Supplies

Battery-Powered Applications