GENERAL DEscriptION
The SGM6029 family is a low voltage, efficient and miniature synchronous Buck converter with ultra-low current. Operating at high switching frequency (4.0MHz, TYP), miniature inductors and capacitors can be used to achieve minimal solution size. The rated load current is from 0.6A to 1A depending on the input voltage and operating fre For high light-load efficiency, the operating mode can smoothly and automatically change between power-save mode and PWM.
The dual-role VSEL/MODE pin sets the output voltage to one of the 16 preset values by sensing an external resistor during startup using an integrated resistor to digital (R2D) converter. After startup, this pin acts as MODE input and applying a logic high on it will force the device in the pulse width modulation (PWM) mode. This will allow using the same part for a wide range of voltage rails in different applications and offer a better output accuracy compared to the conventional external feedback resistor divider. In the forced-PWM (FPWM), the device switches at 4.0MHz (A, B and C versions) or 1.5MHz (D and E versions). High switching frequency reduces the output ripple, but at lighter loads, sacrifices the efficiency a little bit.
The SGM6029 is available in a Green WLCSP-0.74×1.09-6B package.
FEATURES
1.95V to 5.5V Input Voltage Range
2.3μA (TYP) Current
Selectable Switching Frequency of 4.0MHz or 1.5MHz
0.4V Internal Reference Voltage
0.6A to 1A Peak Output Current
2% Output Voltage Regulation Accuracy Full Temperature Range
Programmable Light Load PSM or FPWM
Simple Output Voltage Programming with Integrated R2D Converter
16 Selectable + 1 Fixed Output Voltage Levels:
SGM6029A (4.0MHz): 0.4V to 0.775V
SGM6029B (4.0MHz): 0.8V to 1.55V
SGM6029C (4.0MHz): 1.8V to 3.3V
SGM6029D (1.5MHz): 0.4V to 0.775V
SGM6029E (1.5MHz): 0.8V to 1.55V
Enable Pin with Auto Pull-Down during Startup
Miniature 0201 Optimized Pinout
Output Discharge Feature (When Disabled)
Duty Cycle Operation Capability
Available in a Green WLCSP-0.74×1.09-6B Package
APPLICATIONS
Wearable Electronics
IoT Applications
2 × 1.5V Battery Powered Applications
Smart Phones