SE100 is designed to support QC 2.0
(QC2.0) specifications. It is a low-cost solution to
support QC2.0 functions. SE100 incorporates all
necessary functions to
add QC2.0 capability to
standard Adaptor designs, Portable Battery designs,
and Car-charger designs.
SE100 supports the full output voltage range of either
Class A or Class B. Optionally Class B can be
inhibited for protecting the battery charger from
accidental damage.
SE100 automatically detects whether a connected
Powered Device (PD) is QC2.0 capable before
enabling output voltage adjustment. If a PD that is not
compliant to QC2.0 is detected the SE100 disables
output voltage adjustment to ensure safe operation
with legacy 5 V only USB PDs.

Fullyuick Charge 2.0
specification
ClassA:5V,9V,and12Voutput
voltage
Class B:5V,9V,12V, and 20 V
output voltage
USB battery charging specification
revision 1.2 compatible
Automatic USB DCP shorting D+ to
D- line
Default 5 V mode operation
Very low power consumption
Less than 1 mW at5 V output
Fail safe operation
Adjacent pin-to-pin short-circuit fault
Open circuit pin fault

        应用

Adaptors for smart phones, tablets,
netbooks, digital
cameras, and
bluetooth accessories
Portable Battery Packs supporting
QC.20 functions
Car Cargers
supporting
QC2.0 
functions
Ogther USB power output ports
supporting QC2.0 functions