GENERAL DEscriptION

The SGM41100A is designed for primary protection of Li-Ion/polymer rechargeable cells. The product integrates all the protections required for safe operation of polymer rechargeable cells. The device is packaged in a tiny and thin package. Its small solution size leaves more space for fitting the battery cell into a given cavity for small size wearable devices.

The SGM41100A integrates all the protections and the required low on-resistance disconnect switch on one die. The protection features include charge and discharge protection, detection and protection of a cell in charge over-voltage, charge over-current, discharge under-voltage and discharge over-current. The product also disconnects the battery pack in the case of deep discharge.

The SGM41100A operates in -40℃ to +85℃ temperature range, and is in a thin and low profile UTDFN-1.5×2-6L package. This package with a nominal height of 0.5mm is convenient for small cell packing designs.

FEATURES

• Ultra-Compact Protection Solution

• Pass Resistance: 42mΩ (TYP)

• Operation Current: 0.9μA (TYP)

• Factory Programmable OVP Threshold Options

  4.20V to 4.55V with 0.05V per Step

• Charge/Discharge Over-Current Protection

  3 Thresholds Combination Options

• Battery Under-Voltage Protection

  2.4V/2.6V/2.8V/3.0V Options

• 50nA Deep Discharge Shutdown

• Exhausted Battery Charging from 0.2V

• Input Surge Clamping

• Input Over-Voltage Safe

• Load Short-Circuit Safe

• Reverse Polarity Battery Safe

• Input Reversed-Attaching Safe

• Battery Pack Paralleling Safe

• Locked-Off for Delivery/Assembly

• Available in a Green UTDFN-1.5×2-6L Package

APPLICATIONS

IoT Gadgets

Wearable Devices

Battery Packs