GENERAL DEscriptION
The SGM8706 is a single, rail-to-rail input and output comparator with typical 2.2μA low power supply current. The comparator operates from a wide range of 1.8V to 5.5V supply voltage, and is guaranteed to operate at 1.8V and 5V. This feature is suitable for battery-powered applications.
The SGM8706 is optimized for micro-power, single-supply operation. The push-pull output stage supports rail-to-rail output swing and allows the operation with absolute minimum power consumption when driving any capacitive or resistive load. It also has a latch enable input (LE) pin.
The product features an uncommitted internal voltage reference, comparator input common-mode around 200mV outside the power supply rails and can be operated from 1.8V to 5.5V. The internal 1.2V series voltage reference offers low 42μV/℃ drift, is stable at 10nF capacitive load, and can produce output current up to 2mA (TYP).
The SGM8706 is available in Green SOT-23-6, SOT-23-8 and SOIC-8 packages. The small packages make this device ideal for use in hand-held electronics and mobile phone applications. It is rated over the -40℃ to +85℃ temperature range.
FEATURES
Low Current: 2.2μA (TYP) at VS = 1.8V
Wide Single-Supply Voltage Range: 1.8V to 5.5V
Latch Function Included
Push-Pull Output Current Drive: 18mA (TYP) at VS = 5V
Rail-to-Rail Input and Output
Internal 1.2V Reference Voltage
-40℃ to +85℃ Operating Temperature Range
Available in Green SOT-23-6, SOT-23-8 and SOIC-8 Packages
APPLICATIONS
Portable and Battery-Powered Applications
Alarm and Surveillance Circuits
Mobile Phones
RC Timers
Hand-Held Electronics
Window Detectors
IR Receiver